Low Pitched Roof Systems

Low Pitched Roof Systems

Low Pitched Roof Systems
There are a wide range of materials and various applications that can be used
to make low pitched roof systems. These include slate, built up roofing,
membranes, and modified bitumen. It’s important to research the various
options before making a decision.

Membrane

If you have a low-pitched roof, choosing a membrane that will protect your
investment is important. There are many different types of flat roof
membranes and choosing the right suited one depends on factors such as
your building and area climate.

EPDM

is a common choice for roofing systems. It offers a good
performance due to it’s a single-ply synthetic rubber roofing membrane.
However, it can be prone to degradation from aromatic and halogenated
solvents.

TPO

is another popular option for flat roofs. This thermoplastic polyolefin
membrane is highly reflective and is a great option for dormers and other low-
sloped areas. When installed correctly, it can last 25 years.

PVC

is a strong, puncture-resistant roofing material. It is suitable for both
commercial and residential installations. It is available in a range of
thicknesses from 45 mils to 90 mils.

Modified bitumen

Modified bitumen for low pitched roof systems has been a popular choice for
commercial roofing for over 40 years. These systems have a number of
benefits over built-up roofing systems. However, they have some drawbacks,
too.

A modified bitumen flat roof is a tough and durable option as well as offering
UV protection. This type of roofing is also resistant to high winds and can be
easily applied to a variety of surfaces.
When installing a modified bitumen flat roof, it’s important to take care of the
roof’s drainage. If you don’t, it can prematurely deteriorate. Also, water can
build up and cause significant damage. You’ll need to make sure that the
roof’s surface drains within 48 hours.
A modified bitumen flat roof has 3 ways of being installed. The first method
involves using a torch to apply the roof’s membrane. The other two methods
involve mechanically fastening the membrane to the substrate.

Slate

Slate low pitched roof systems are ideal for steep-slope roofing applications.
They’re durable and easy to maintain and have a range of advantages over
traditional roofing systems.
Water ingress is one of the main reasons slates fail on low-pitch roofs. The
water collects in the gaps between slates and drains to the next course. This
causes the weather resistance of the roof to decrease. However, if installed
properly, slate roofs can last for over a century.
Slates are available in different colours and sizes. Depending on the pitch of
the roof and the location, they can be used in a variety of styles. For example,
a higher pitch can be covered with thicker slates, while a narrow roof can be
covered with thin slates.H2 Hydrokinetic
Hydrokinetic systems are a class of renewable energy devices that produce
electricity. They work by converting the kinetic energy of water flows. Unlike
conventional hydropower units, they are not required to possess a reservoir.
These systems can be used in both free-flowing and manmade streams,
rivers, and ocean currents. The use of these turbines is considered to be a
clean and sustainable form of energy production. It can be used for irrigation,
heating, and seawater desalination.
As well as being environmentally friendly, hydrokinetic turbines are also
portable and easy to install. This makes them useful for both urban and rural
areas.

Although there are several advantages of these turbines, there are also some
weaknesses. Engineers must continually assess the potential for
improvement. A significant drawback to marine hydrokinetic systems is that
they can interfere with aquatic life. For instance, these structures can create
underwater noise and can impede reproduction at higher trophic levels.

Built-up

The built-up roofing system has been around for a long time and serves well
for the most part. However, the system also has its flaws. To start with, it
requires considerable risks and special systems to ensure the roof’s longevity.
The built-up roofing system is best suited to large, low slope roofs, and is not
a suitable option for small roofs or for roofs over heated spaces.
Although the built-up roofing system use is declining, there is still a market for
this type of roofing system. Those looking for a low-maintenance alternative to
other roof types should consider this system.
Typical materials for a low-slope roof include aggregate, vapor retarders,
asphalt, insulation and a membrane. The roofing membrane itself can consist
of between two to five plies. The top ply is typically topped off with a
waterproofing layer. Aggregate is often added for durability, but it can also
increase the reflectivity of the underlying roof material.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *